tosium.png通项金属材料(上海)有限公司

TOSIUM METALS, ALLOYS, STEELS DISTRIBUTOR

设为首页 | 收藏本站
 

ASTM F1586-21 外科植入物用锻造氮强化21Cr-10镍-3锰-2.5钼不锈钢合金棒的标准规范(UNS S31675).pdf下载

2022-10-18 23:08来源:钨华集团TUNGSTITE作者:通项公司TOSIUM网址:http://www.tosium.com/ 
文章附图

标准编号:ASTM F1586-21

中文标准名称:外科植入物用锻造氮强化21Cr-10镍-3锰-2.5钼不锈钢合金棒的标准规范(UNS S31675)

英文标准名称:Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)

语言:英文版,中文版

发布日期:2021-09-15

实施日期:2021-09-15

标准类别:美国材料与试验协会ASTM

中国标准文献分类法(中标分类CCS):

中国标准文献分类法(中标分类CCS):医药卫生技术 >> 医疗设备 >> 外科植入物、假体和矫形

标准页数:5

标准简介:1.1本规范涵盖了外科植入物用锻造氮强化21Cr-10Nikel-3manganese-2.5molybdenum不锈钢合金棒的化学、机械和冶金要求。1.2以英寸-磅单位或国际单位表示的数值应单独视为标准值。每个系统中规定的值可能不是精确的等效值;因此,每个系统应相互独立使用。将两个系统的值合并可能会导致不符合标准。1.3本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 21chromium—10nickel—3manganese—2.5molybdenum stainless steel alloy bar for surgical implants.1.2The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

文件格式:PDF电子版

整理单位:通项金属材料(上海)有限公司

全文下载:

链接: https://pan.baidu.com/s/1v3Bu-yB_jwCoE99aZZqiHA

提取码: f487